TR-10T/5T
Thread Rolling Machine
SPECIFICATIONS
This machine can also be used in the in-feed process with parallel die axes, the length of the profile to be rolled depends on the width of the rolling dies, there is no axialmovement of the workpiece. Design characteristics:
1. | Swivelable roller shafts at full utilization of the rolling force. |
2. | Short working cycles by increasing the forward-return speed. |
3. | Increase driving power, optional use in slow motion/normal and rapid advance by hydraulic multi-circuit system. |
4. | Increase driving power, optional use in slow motion/normal and rapid advance by hydraulic multi-circuit system. Increase in the efficiency and improvement of the utilization to power by gears on parallel axes and drive by universal shafts. |
5. | Free passage between the roller shafts for the manufacture of any length of profiles. |
|
|
TR-10T
|
TR-5T
|
---|---|---|---|
|
|
Φ50 mm
|
Φ50 mm
|
|
Φ5 mm
|
Φ2 mm
|
|
|
0.6-2.5 mm
|
0.25-2 mm
|
|
(in-feed) |
5-70 mm
|
5-50 mm ?2-12
|
|
(thru-feed) |
under Φ35: Free
FromΦ35-50:Within 300L |
underΦ12: Free
FromΦ12-50:Within 300L |
|
|
20-70 RPM(Standard) TR-10T, TR-5T
50-105 RPM(Optional) TR-18T |
||
Rolling Dies
|
|
Φ130 mm
|
Φ100 mm
|
|
Φ54 mm
|
Φ50.5 mm
|
|
|
70 mm
|
50 mm
|
|
|
10 mm
|
8 mm
|
|
|
|
160mm
|
151 mm
|
Min. diameter
|
100 mm
|
100 mm
|
|
|
10 Tons
|
5 Tons
|
|
|
7.5HP (5.6kw)
|
2HP (1.5kw)
|
|
Hydraulic power
|
3HP (2.2kw)
|
2HP (1.5kw)
|
|
Coolant power
|
1/8HP (0.09kw)
|
1/8HP (0.09kw)
|
|
Height from floor to spindle center
|
810 mm
|
760 mm
|
|
Floor space required
|
1130L x 1241W mm
|
1150L x 1150W mm
|
|
Over height
|
1050 mm
|
1000 mm
|
|
|
|
1250 kgs
|
920 kgs
|
|
1400 kgs
|
1070 kgs
|